Hardwood Floor Refinishing in Calgary: The Ultimate Guide

How do you think about hardwood floor refinishing in Calgary? Is this something that you want to do, or are you just not sure about the options available to you at the moment? If so, then it’s time to learn all about this process and how it can be beneficial to you and your home, but in order to do that, we have to start at the beginning with hardwood floor refinishing in Calgary. That’s why our guide on hardwood floor refinishing in Calgary is an excellent place to start when it comes to learning more about the process of refinishing hardwood floors.

Advantages of Getting New Wood Floors Over Re-Finishing

  1. You won’t have to deal with the hassle of sanding and refinishing your floors every few years. 
  2. New wood floors are easier to clean and maintain than old, worn-out floors. 
  3. You can choose from a variety of colors and finishes to match your home’s décor. 
  4. New wood floors can increase the value of your home. 
  5. You’ll be able to enjoy your new floors for many years to come. 
  6. New wood floors may cost more upfront but they will save you money over time as you won’t need to pay for maintenance or refinishing every couple of years. 
  7. There is no way that re-finishing will be cheaper than replacing the entire floor – it’s an investment in your home! 
  8. With all these benefits, it’s easy to see why so many homeowners are choosing new wood floors over re-finishing their existing ones!

How Much Does Refinishing Cost?

The cost of refinishing a hardwood floor depends on a few factors, including the size of the room, the condition of the existing floor, and the type of finish you choose. Expect to pay anywhere from $2 to $4 per square foot for materials and labor. If you have a large room or multiple rooms, you can expect to pay on the higher end of that range.

Before you Begin

There are a few things you should do before you begin hardwood floor refinishing in Calgary. First, you need to assess the condition of your floors. If they’re in good shape, you can move on to the next step. However, if your floors are damaged, you’ll need to repair them before you refinish them. Next, you need to choose the right type of finish for your floors. There are many different types of finishes available, so make sure you do your research before making a decision.

Considerations before starting work

Before you start any hardwood floor refinishing project, there are a few things you need to take into consideration. First, you need to make sure that your floors are actually hardwood. If they’re not, then you’ll need to consult with a professional to see if refinishing is even an option. Second, you need to decide what kind of finish you want for your floors. There are a variety of options available, and each has its own set of pros and cons.

What Kind of Wood is it?

Many people don’t know that there are different types of hardwood. The three main types are engineered, solid, and laminate. Engineered hardwood is made of a plywood base with a thin layer of hardwood on top. Solid hardwood is just one piece of wood, cut into planks. Laminate is made of several layers of pressed wood with a photograph of wood grain on top. Some people may mistake it for real wood. 

As a general rule, the more expensive the flooring, the better quality it will be. You should consider whether you want to spend more time maintaining your floor or less time because certain floors require more upkeep than others. If you have kids or pets then you should consider how durable your flooring will be over time. Some floors are very resistant to stains and spills while others can scratch easily or dent with some force applied to them.

Repair or Replace Boards That are Too Damaged

If your hardwood floors are too damaged to simply be sanded and refinished, you may need to replace some of the boards. This is a more intensive process, but it can be well worth it if it means getting your floors back to their original beauty. To replace individual boards, start by prying up the trim around the perimeter of the room. Then, use a crowbar to remove the damaged board and insert a new one in its place. Replace any nails that might have pulled out with shorter ones. Use a hammer to pound down any protruding nails so they don’t snag on clothing or cause injury when walked on. Replace the trim along the edge of the floor and then caulk between the trim and floorboards for an extra tight seal.

Clean Up Your Old Finish

The first step is to clean up your old finish. You’ll need to remove all the dirt, dust, and debris that has accumulated on your floors over time. This can be done with a vacuum and a damp mop. Once you’ve cleaned up the surface, you’ll need to sand down the old finish. There are many types of sandpaper for different surfaces, so make sure you get the right one for hardwood flooring! If there are parts of your floor that have been scratched or gouged from furniture sliding across it, then you’ll need to fill those spots with wood putty before continuing. 

A new coat of polyurethane will protect your floor from scratches and other damage. Apply the polyurethane evenly using a brush or roller for even coverage.

Sanding on a Dusty Surface? Use an Air Filter Mask!

Airborne dust particles are especially dangerous to inhale, and refinishing hardwood floors creates a lot of them. To avoid breathing in harmful dust, always wear an air filter mask when sanding. You can find these masks at most hardware stores.

Pick out the Perfect Stain

There are a few things you need to consider when choosing the perfect stain for your hardwood floors. The first is the type of wood you have. If you have a light-colored wood, you’ll want to choose a light-colored stain. If you have a dark-colored wood, you’ll want to choose a dark-colored stain. The second thing to consider is the color of your walls and furniture. You’ll want to choose a stain that compliments the colors in your room.

Apply Each Coat Safely and Smoothly

Applying each coat of finish safely and smoothly is crucial to a successful refinishing job. Here are a few tips to help you get the best results

Building a Base for the Wood Stain

The base is the first layer of protection for your hardwood floors and it needs to be strong enough to withstand foot traffic, kids, pets, and any other type of wear and tear. A good base will also make it easier to apply the wood stain evenly. To create a strong base, start by sanding down the floor with a rough grit sandpaper. Then, move on to a finer grit sandpaper and sand the floor again.

Final Touches

Once you’ve refinished your hardwood floors, it’s important to give them a final touch. Here are a few things you can do to make sure your floors look their best

READ ALSO: Sam Stardew Valley Guide / Eel Stardew Valley Guide / Catfish Stardew Valley Guide / Sturgeon Stardew Valley Guide / Clint Stardew Valley Guide / Robin Stardew Valley Guide / Gus Stardew Valley Guide / Barn Stardew Valley Guide / Alex Stardew Valley Guide / Leo Stardew Valley Guide

Written by

Meet Master Henry, the prolific Australian author with a flair for capturing the essence of lifestyle, travel, and fashion in his captivating prose. Hailing from the land Down Under, Henry weaves vivid tales that transport readers to exotic destinations and infuse his writing with a touch of Aussie charm. With a keen eye for trends and an innate understanding of the finer things in life, Master Henry's work transcends conventional genres, offering a unique blend of sophistication and wanderlust.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *