Water Logic Provides The Best RO Plants In Pakistan At Good Prices

Please tell me about RO systems for home use

RO systems are used in homes to treat contaminated drinking water. In this system, the contaminated water molecules pass through a semi-permeable membrane that traps impurities and contaminants. The water is then removed from the environment to produce clean, uncontaminated drinking water.

Water logic, a reverse osmosis unit for home use, is capable of removing different types of molecules, impurities, and ions from water. RO plant price in Pakistan at Water Logic, an online water purifier manufacturer. These water filters are used in a wide range of applications from drinking water production to industrial applications.

Additional Features of a Home Reverse Osmosis Plant

5-step advanced reverse osmosis water purification process

  • NSF-compliant 5-gallon water tank.
  • Production capacity 100 gallons per day
  • 0001-micron size membrane
  • FDA-approved polypropylene housing with flat cap
  • Imported cartridge and filter housing
  • Fully automatic shut-off valve
  • Long-acting chrome valves
  • Fully assembled in the USA
  • 100% factory inspected, sterilized and ready to install
  • Special 6-month warranty
  • The Best in Home RO Systems

How does a home reverse osmosis (RO) system work?

Reverse osmosis, also known as “high osmosis,” is a process that produces pure water by reducing particles to the molecular level. Reverse osmosis filters reduce salts and other water contaminants to provide high quality, clean water.

Most reverse osmosis systems work in a similar way. However, several factors affect their effectiveness. These include the pressure of the water, the quality of the filter and membrane, the water temperature, and the type and number of TDS (total dissolved solids).

Reverse osmosis systems work by forcing the water from the tap to pass through a membrane or filter. It can also be carried out in several stages. The membrane allows only water to pass through, leaving behind impurities and foreign matter to be flushed down the drain. The treated water is then sent to a tank, which can be accessed by turning on the faucet.

Learn more about reverse osmosis membranes

Stage 1 – (SED) Sedimentation Filter

The water passes through a large capacity polypropylene sediment filter. This sediment filter removes all large particles up to 5 microns in size, including rust, dust, and sediment.

Stage 2 – (GAC) Granular Activated Carbon Filter

The second stage is a granular activated carbon filter. It is also capable of removing contamination down to 5 microns. This is the initial filter for the next stage; the second stage removes unpleasant chlorine, odor, color, and turbidity from the water.

Stage 3 – (ACB) Activated Carbon Block Filter

The water passes through an activated carbon filter. In addition, a 5-micron filter removes residual chlorine, taste and odor. Hard-to-remove chemicals such as chloramines are also removed at this stage.

Stage 4 – (ROM) Reverse Osmosis

The water passes through the heart of Water logic’s residential reverse osmosis system, the TFC membrane, which has a high rejection rate and granularity of 0.0001 microns. This is the same technology used by bottled water manufacturers; an NSF certified semi-permeable membrane that effectively removes TDS (Total Dissolved Solids), viruses, bacteria, lead, arsenic, sodium, cysts, giardia, chromium and other contaminants.

Stage 5 – After (PAC) Activated Carbon

In the last stage, a finer PAC filter is used, which acts as a trickling filter for final polishing. When the water is discharged from the storage tank, this filter removes any remaining taste or odor, allowing the water to taste fresh.

Additional Stages of the Water logic Reverse Osmosis System

These steps can be added according to your requirements.

Step 6 – (BMB) Mineral Balance

This filter improves the quality of pure water by adding minerals normally found in natural mineral water, such as calcium, magnesium, sodium and potassium, which are necessary for human development and health.

Stage 7 – (ABF) Alkaline balance filter (for PH balance)

An alkaline balance filter converts acidic RO water into ideal natural alkaline water and calcium ionized water. The alkaline ionizer simply ionizes back the minerals such as calcium, magnesium, sodium, and potassium that are removed by the water purifier.

Step 8 – (ANS) Antibacterial Nano Silver

This filter destroys 99.9% of the remaining bacteria and coliforms that pass through the RO membrane.

By Master James

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts